Qualitative and quantitative analysis of phenolic acid glycosides in Ginkgo biloba L. leaf,G. biloba leaf extract and its injection

Ginkgo biloba L. leaf (GBL) is one of the most commonly used medicinal plants in the world. Phenolic acids with biological activities have a relatively high content in G. biloba leaf extracts (GBE); therefore they are of great significance for the quality control of GBL, GBE and its preparations. However, there have been few studies focused on their analysis. In this work, 12 phenolic acids, including 11 phenolic acid glycosides, were identified by liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (LC–Q-TOF/MS). Then, a method combining enzymolysis with HPLC was established for quantification of phenolic acid glycosides. It was found that the aglycones of phenolic acid glycosides mainly comprised five phenolic acids: 2,4,6-trihydroxybenzoic acid, protocatechuic acid, p-hydroxybenzoic acid, vanillic acid and p-coumaric acid. The quantitative method was validated, and the correlation coefficient (0.9993–0.9999), recovery (≥88.4%), repeatability (≤0.8%), and inter-day precision (≤5.5%) were satisfactory. Finally, the contents of glycosides of five phenolic acids in GBL, GBE and GBE injection from different sources were determined by the developed method. The method was accurate, repeatable and practicable, which could be helpful for the quantification of phenolic acid glycosides in other products containing GBL or GBE.     

Thermal cross-link between 2,5-furandicarboxylic acid-based polyimides and bismaleimide via Diels–Alder reaction

A series of cross-linked polyimides (PIs) were prepared via two-step solution polycondensation from 2,2-bis[4-(3,4-dicarboxyphenoxy)phenyl]propane dianhydride (BPADA) and 2,5-furandicarboxylic acid-based diamines, N,N′-bis(4-amino-2-(trifluoromethyl)phenyl)furan-2,5-dicarboxamide (TFFDA) and N,N′-bis(4-aminophenyl)furan-2,5-dicarboxamide (p-FDDA), followed by thermal crosslinking reaction with bismaleimide. The thermal crosslinking reaction and its mechanism were studied by FTIR spectra and model reaction analysis, which showed Diels–Alder reaction between furan group and maleimide group played a main role in the thermal treatment. The properties of cross-linked PIs were characterized using dynamic mechanical thermal analysis, thermogravimetric analyses, tensile testing, ultraviolet-visible spectra, and wide-angle X-ray diffraction. The cross-linked polyimide film showed improved solvent-resistance, thermal and mechanical properties with T_g values of 234–306^oC, tensile strengths of 82–98 MPa and moduli of 2.3–3.0 GPa.     

Cross-polarization with magic-angle spinning kinetics and impedance spectroscopy study of proton mobility,local disorder,and thermal equilibration in hydrogen-bonded poly(methacrylic acid)

The ¹H–¹³C cross-polarization with magic-angle spinning (CP MAS) kinetics was studied in poly(methacrylic acid) (PMAA) having the purpose to track the links between the local order in the main chain and the proton dynamics in peripheral hydrogen bond networks. The experimental CP MAS kinetic curves were analyzed applying the models of isotropic and anisotropic spin-diffusion with thermal equilibration. The fractal dimension D_p ≈ 3 was deduced that indicates that PMAA behaves as an isotropic 3D-system. No proton conductivity in the neat PMAA was deduced from the impedance spectroscopy data analyzing the frequency dependences of the complex dielectric permittivity. The value of local order parameter S = 0.70 for CH₂ in PMAA occupies an intermediate position between 0.63 and 0.85 deduced for CH₂ sites in the main chains of poly(vinyl phosphonic acid) and poly(2-hydroxyethyl methacrylate), that is, the true proton conductor and the polymer that contains the H-bond network, however, no proton conductivity, respectively.     

Electronic Transitions in Different Redox States of Trinuclear 5,6,11,12,17,18-Hexaazatrinaphthylene-Bridged Titanium Complexes: Spectroelectrochemistry and Quantum Chemistry

Multinuclear transition metal complexes bridged by ligands with extended π-electronic systems show a variety of complex electronic transitions and electron transfer reactions. While a systematic understanding of the photochemistry and electrochemistry has been attained for binuclear complexes, much less is known about trinuclear complexes such as hexaphenyl-5,6,11,12,17,18-hexaazatrinaphthylene-tristitanocene [(Cp₂Ti)₃HATN(Ph)₆]. The voltammogram of [(Cp₂Ti)₃HATN(Ph)₆] shows six oxidation and three reduction waves. Solution spectra of [(Cp₂Ti)₃HATN(Ph)₆] and of the electrochemically formed oxidation products show electronic transitions in the UV, visible and the NIR ranges. Density functional theory (DFT) and linear response time-dependent DFT show that the three formally titanium(II) centers transfer an electron to the HATN ligand in the ground state. The optically excited transitions occur exclusively between ligand-centered orbitals. The charged titanium centers only provide an electrostatic frame to the extended π-electronic system. Complete active self-consistent field (CASSCF) calculation on a structurally simplified model compound, which considers the multi-reference character imposed by the three titanium centers, can provide an interpretation of the experimentally observed temperature-dependent magnetic behavior of the different redox states of the title compound in full consistency with the interpretation of the electronic spectra.     

Composite host lattices of 4,4′‐sulfonyldibenzoate water/boric acid in two tetrapropylammonium inclusion compounds

Two novel inclusion compounds of 4,4′‐sulfonyldibenzoate anions and tetrapropylammonium cations with different ancillary molecules of water and boric acid, namely bis(tetrapropylammonium) 4,4′‐sulfonyldibenzoate dihydrate, 2C₁₂H₂₈N⁺·C₁₄H₈O₆S²⁻·H₂O ( 1 ), and bis(tetrapropylammonium) 4,4′‐sulfonyldibenzoate bis(boric acid), 2C₁₂H₂₈N⁺·C₁₄H₈O₆S²⁻·2H₃BO₃ ( 2 ), were prepared and characterized using single‐crystal X‐ray diffraction. In the two salts, the host 4,4′‐sulfonyldibenzoic acid molecules, which are converted to the corresponding anions under basic conditions, can be regarded as proton acceptors which link different proton donors of the ancillary molecules of water or boric acid. In this way, an isolated hydrogen‐bonded tetramer is constructed in salt 1 and a ribbon is constructed in salt 2 . The tetramers and ribbons are then packed in a repeating manner to generate various host frameworks, and the tetrapropylammonium guest counter‐ions are contained in the cavities of the host lattices to give the final stable crystal structures. In these two salts, although the host anion and guest cation are the same, the difference in the ancillary small molecules results in different structures, indicating the significance of ancillary molecules in the formation of crystal structures.     

Facile synthesis of high-molecular-weight acid-labile polypeptides using urethane derivatives

Polypeptides have received noticeable attention in the biomedical field due to their structural versatility and biomimetic properties. Particularly, polypeptides that are responsive to biological stimuli, such as mildly acidic extracellular and intracellular conditions, have great potential as delivery carriers for therapeutics. However, synthesis of high-molecular-weight acid-labile peptides is often daunting due to highly restrictive polymerization conditions and limitations in preserving acid-degradable functional groups. For instance, the popular N-carboxyanhydride (NCA) ring-opening polymerization (ROP) is efficient, but acid-labile NCA monomers are difficult to synthesize and store. In this study, acid-labile polypeptides with high molecular weights were synthesized under mild, permissive conditions using carboxylated urethane derivative monomers which are stable for ease of handling. The polymerization was successful in various organic solvents at room temperature, and did not require additional energy or initiation to drive the formation of NCA intermediates. The polymerization was also rapid enough to be independent of inert atmosphere. The strategy explored here to synthesize high-molecular-weight acid-labile polypeptides offers significant advantages including facile synthesis of acid-labile urethane derivative monomers that are stable, even in contact with moisture, and fast polymerization under easily achievable conditions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 280–286     

Palladium‐Catalyzed Direct C2‐Arylation of an N‐Heterocyclic Carbene: An Atom‐Economic Route to Mesoionic Carbene Ligands

Blocking the C2 position of an imidazole‐derived classical N‐heterocyclic carbene (NHC) with an aryl group is an essential strategy to establish a route to mesoionic carbenes (MICs), which coordinate to the metal via the C4 (or C5) carbon atom. An efficient catalytic route to MIC precursors by direct arylation of an NHC is reported. Treatment of 1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene (IPr) with an aryl iodide (RC₆H₄I) in the presence of 0.5 mol % of [Pd₂(dba)₃] (dba=dibenzylideneacetone) precatalyst affords the C2‐arylated imidazolium salts {IPr(C₆H₄R)}I (R=H, 4‐Me, 2‐Me, 4‐OMe, 4‐COOMe) in excellent (up to 92 %) yields. Treatment of {IPr(C₆H₅)}I with CuI and KN(SiMe₃)₂ exclusively affords the MIC–copper complex [(IPrPh)CuI].     

丹酚酸A 对H2O2 所致大鼠脑微血管内皮细胞氧化损伤保护的实验研究

目的 观察丹酚酸A 对H2O2所致大鼠脑微血管内皮细胞（RCMECs）氧化损伤的保护作用，并探讨其可能的作用机 制。方法 分离并培养大鼠脑微血管内皮细胞，用H2 O2 损伤的方法建立氧自由基损伤模型。采用丹酚酸A 进行干预后，分别测定细胞培养液中乳酸脱氢酶（LDH）活性、血栓素B2（TXB2）水平、6- 酮基前列腺素1α（6-keto-PGF1α）的含量，以及细胞内和培养液中脂质过氧化产物丙二醛（MDA）含量和超氧化物歧化酶（SOD）的活性。结果 H2O2致RCMECs 氧化损伤后，细胞LDH 释放水平、TXB2和MDA 的含量均明显增加，同时6-keto-PGF1α 含量和SOD 活性显著下降；而丹酚酸A 预处理后能呈浓度依赖性的降低RCMECs 氧化损伤后LDH 水平、TXB2含量和细胞内外的MDA 含量，提高受损细胞6-keto-PGF1α 的表达和细胞内外SOD 活性。结论 丹酚酸A 对H2O2所致RCMECs 氧化损伤具有保护作用，其机制可能与其抗氧化作用有关。     

Physical aging in amorphous poly(ethylene furanoate): Enthalpic recovery,density, and oxygen transport considerations

The current work utilizes three separate techniques to study the physical aging process in amorphous poly(ethylene furanoate) (PEF), which is a recently introduced engineering thermoplastic with enhanced properties compared to petroleum‐sourced poly(ethylene terephthalate). Differential scanning calorimetry aging experiments were conducted at multiple aging temperatures and times, and the resultant enthalpic recovery values compared to the theoretical maximum enthalpy loss evaluated from calculations involving extrapolation of the equilibrium liquid line. Density measurements reveal densification of the matrix for the aged versus unaged samples, and provide an estimate for the reduction in free volume for the aged samples. Complementary oxygen permeation and pressure‐decay sorption experiments provide independent verification of the free volume reduction mechanism for physical aging in glassy polymers. The current work provides the first detailed aging study for PEF. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 389–399